Night vision astronomy means looking at the sky through an image intensifier, the same kind of device used in night vision goggles. I use one at every star party, and it is usually the thing people talk about afterward. Most have never looked through one.

How it works

An image intensifier takes the few photons coming from a faint object, turns them into electrons, multiplies them thousands of times, and fires them at a phosphor screen that you look at through an eyepiece. It all happens instantly. There is no exposure, no stacking and no screen in the usual sense: you are looking into an eyepiece, and when the telescope moves, the view moves with it.

Mine is a PVS-14, a handheld unit about the size of a small flashlight. I use it two ways:

  • By hand. Held up to the sky like a small spyglass, it shows the Milky Way and the largest nebulae across a wide field.
  • At the telescope. On my 14.7" Dobsonian, it turns faint nebulae into bright, detailed objects.

Intensifier tubes are most sensitive to red and near-infrared light. That happens to be where glowing hydrogen gas shines, which is why nebulae are what night vision does best. Adding a narrowband hydrogen-alpha filter blocks most city light and moonlight while letting the nebula through.

What it looks like

These clips were filmed with a phone held up to the night vision eyepiece on my 14.7" telescope. Nothing is stacked, stretched or processed afterward. This is the live view, and a phone camera only catches part of what your eye picks up.

The Orion Nebula, live
The Horsehead and Flame nebulae, live
The Rosette Nebula, live
The Seagull Nebula, live

The Horsehead Nebula is famously one of the hardest objects to see in any telescope. Plenty of experienced observers have never seen it. With night vision, a whole group can see it in a few seconds each, even with some moonlight or city glow in the sky.

What it does well

  • Emission nebulae. Orion, the Horsehead and Flame, the Rosette, the Lagoon, the North America Nebula and dozens more.
  • The Milky Way. By hand, with no telescope, dark dust lanes and glowing clouds stand out along its whole length.
  • Star clusters. Globular clusters break up into far more stars than the eye alone can pick out.
  • Bad conditions. It keeps working from a city backyard, and when the Moon is up.

What it does not do

  • Color. The view is one color, set by the phosphor screen.
  • The Moon and planets. They are already bright. A regular eyepiece shows them better.
  • A perfectly clean image. On the faintest objects you see a fine sparkle, a little like film grain.
  • Replace a dark sky. It helps a great deal in the city, but a dark site still shows more.

Night vision or a smart telescope?

I have owned and reviewed nearly every smart telescope on the market, and I like them. They are a different experience. A smart telescope collects light for minutes, stacks it and gives you a color picture on a phone. Night vision gives you a live, single-color view through an eyepiece, with your own eye, right now. At a star party I use night vision, because the whole point of the evening is looking through an eyepiece.

The catch is cost. A good intensifier tube runs about $2,000, and higher-end tubes cost $5,000 to $8,000. Mine was about $3,000. That is why few people own one, and why it is worth trying at a star party before you think about buying.

Try it

Every private star party in Tucson and Phoenix includes the night vision device, by hand and at the telescope. I also give talks on night vision astronomy to clubs and at conferences. See press and speaking.

Common questions

What is night vision astronomy? Using an image intensifier, the same kind of device used in night vision goggles, to look at the sky. It amplifies faint light in real time, so nebulae that are invisible or barely visible to the eye show up live, either through a telescope or with the device held up to the sky.

Does night vision work in light pollution or moonlight? Yes, much better than ordinary observing does. With a narrowband filter in front of it, a night vision device shows bright nebulae from a city backyard and with the Moon up. A dark sky still shows more.

Is night vision astronomy the same as using a smart telescope or a camera? No. A smart telescope takes many exposures, stacks them and shows the result on a screen after a few minutes. Night vision is live and analog: light goes in one end and you look into the other with your own eye. Nothing is stacked or processed.

What can you see with night vision? Emission nebulae are the big one: the Orion Nebula, the Horsehead, the Rosette, the North America Nebula and many more. The Milky Way, star clusters and globular clusters also gain a lot. It does little for the Moon and planets, which are already bright.

Does night vision show color? No. The view is a single color, set by the device’s phosphor screen. What you gain is brightness and detail.

How much does night vision for astronomy cost? A good image intensifier tube costs about $2,000, and higher-end tubes run $5,000 to $8,000. The PVS-14 that Zane Landers uses at star parties cost about $3,000.

How can I try night vision astronomy? Zane Landers brings a PVS-14 night vision device to every private star party in Tucson and Phoenix, and guests use it both by hand and at the telescope.